STS-96

**STS-96**
Organization	NASA-Office of Space Flight (United States)
Mission type	Human Crew
Launch date	May 27, 1999
Launch vehicle	Space Shuttle
Launch site	Cape Canaveral, United States
COSPAR ID	1999-030A
Inclination	51.6 degrees
Experiments	Here
Alternate Names	25760
Additional Information	Here
Telecommunications Information	Here
Data Collection	Here
Payload Mass Up	10299.72 kg
Payload Mass Down	8813.64 kg
Orbiter	Discovery
Lift Off Mass	2,051,923.18 kg
Orbiter Weight at Liftoff	103,624.55 kg
Orbiter Weight at Landing	100,756.36 kg
Landed	Concrete runway 15 at Kennedy Space Center, Fla.
Orbits of Earth	154
Orbital Altitude	173 nautical miles (199 statute miles)

From The Space Library

Revision as of 05:03, 9 August 2013 by RobertG (Talk | contribs)

(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)

Jump to: navigation, search

[edit] Crew

Commander: Kent V. Rominger
Pilot: Rick D. Husband
- Payload Commander:
- Mission Specialist 1: Ellen Ochoa
- Mission Specialist 2: Tamara E. Jernigan
- Mission Specialist 3: Daniel T. Barry
- Mission Specialist 4: Julie Payette, Canadian Space Agency
- Mission Specialist 5: Valery Ivanovich Tokarev, Russian Space Agency
- Payload Specialist 1:
- Payload Specialist 2:

ISS/Mir Crew Transport

[edit] Mission

STS 96 was an American shuttle spacecraft. Its primary mission was to ferry two tons of supplies and spare parts to the International Space Station. The crew carried out some repair and maintainance work on ISS and installed mufflers to reduce the noisy fans in the Zarya module. The crew also installed a Russian crane called Strela on Zarya. The shuttle also boosted ISS to a higher altitude and released a small free-flying sphere named STARSHINE to encourage students to track it visually. Other payloads on STS-96 were the Student Tracked Atmospheric Research Satellite for Heuristic International Networking Equipment (STARSHINE), the Shuttle Vibration Forces Experiment (SVF) and the Orbiter Integrated Vehicle Health Monitoring - HEDS Technology Demonstration (IVHM HTD). The STARSHINE satellite consisted of an inert, 19-inch hollow sphere covered by 1,000 evenly-distributed, flat, polished mirrors, each 1 inch in diameter. The payload consisted of the STARSHINE satellite, integrated with the Pallet Ejection System (PES), then mounted inside a lidless carrier. The HH equipment consisted of one HH Lightweight Avionics Plate (LAP), then mounted inside a lidless carrier. Additional HH equipment consists of one Hitchhiker Ejection System Electronics (HESE), one 5.0 cubic-foot HH canister, and one Adapter Beam Assembly (ABA). The purpose of the mission was to train international student volunteer observers to visually track this optically reflective spacecraft during morning and evening twilight intervals for several months, calculate its orbit from shared observations, and derive atmospheric density from drag-induced changes in its orbit over time. The Shuttle Vibration Forces (SVF) Experiment provided flight measurements of the vibratory forces acting between an aerospace payload and its mounting structure. The force transducers were incorporated into four custom brackets which will replace the existing brackets used to attach the 5 ft standard canister to the side wall GAS adapter beam. The payload was activated automatically by the Orbiter Lift-off vibration and will operate for approximately 100 seconds. STS-96 was the second flight of the SVF experiment The purpose of the Orbiter Integrated Vehicle Health Monitoring- HEDS Technology Demonstration (IVHM HTD) was to demonstrate competing modern, off-the-shelf sensing technologies in an operational environment to make informed design decisions for the eventual Orbiter upgrade IVHM. The objective of IVHM was to reduce planned ground processing, streamline problem troubleshooting (unplanned ground processing), enhance visibility into systems operation and improve overall vehicle safety.

[edit] EVA

Extravehicular Activity (EVA) conducted by Tamara Jernigan and Daniel Barry, 7 hours, 55 minutes. During the EVA, Jernigan and Barry transferred and installed two cranes from the shuttle's payload bay to locations on the outside of the station. They also installed two new portable foot restraints that will fit both American and Russian space boots and attached three bags filled with tools and handrails that will be used during future assembly operations. Once those primary tasks were accomplished, Jernigan and Barry installed an insulating cover on a trunnion pin on the Unity module, documented painted surfaces on both the Unity and Zarya modules, and inspected one of two early communications system antennas on the Unity. Other tasks completed during the space-walk included moving foot restraints into PMA-1 (pressurized mating adapter) and installing three bags containing tools for use during later flights. Throughout the spacewalk, Jernigan and Barry were assisted by their crew mates as Mission Specialist Ellen Ochoa operated the shuttle's robot arm to maneuver Jernigan around Discovery's cargo bay, and Canadian Space Agency astronaut Julie Payette acted as "choreographer" of the spacewalk from Discovery's flight deck.

[edit] Payload

International Space Station (A.1); SPACEHAB double module; Integrated Vehicle Health Monitoring HEDS Technology Demonstration 2; Student-Tracked Atmospheric Research Satellite for Heuristic International Networking Equipment (STARSHINE); Shuttle Vibration Forces Experiment; MIRTS change-out; cargo transfer

Mission patch: