Search wiki using Sphinx

Jump to: navigation, search

Image:ISS0012.jpg Image:ISS4a.jpg Category:International Space Station

... Wheelock installed the Harmony module in a temporary location on the ISS and readied the P6 truss for its relocation. EVA 2, 6 hours, 33 minutes; Stephanie Wilson and Wheelock used Canadarm2 to grapple the P6 truss secured atop the Z1 truss. Parazynski and Tani teamed to disconnect cables from the P6, allowing it to be removed from the Z1 truss. Tani visually inspected the station's ...

... California Launch Vehicle Education Initiative (CALVEIN) research team successfully launched and recovered the Prospector 6 (P6) test vehicle at the Mojave Test Area owned and operated by the Reaction Research Society ... University at Long Beach had designed and built the partially reusable 27-foot (8-meter) P6 test vehicle, which had flown to just under 3,000 feet (914 meters), a milestone toward the team's goal. P6 had also carried student payloads from across the country: a mini-DV camera to capture ...

... minutes. EVA 1, Tanner and Noriega, 7 hours, 33 minutes; Tanner and Noriega attached the P6 integrated truss structure to the Z1 truss, prepared the solar arrays for deployment, and prepared ... tasks that were planned for future space station assembly missions. Payload International Space Station (4A); P6 photovoltaic array assembly; integrated equipment assembly Mission patch: Image:sts-97-patch.jpg 200px Books ...

... task during the spacewalk was the retraction of the solar arrays on the station’s P6 truss, so that the newer solar arrays on the P4 truss could begin tracking the motion of the Sun. Although NASA had designed the P6 ’s arrays to fold up like an accordion, mechanical problems prevented crew members from fully ...

... 5 hours and 28 minutes, the pair relocated the S-band antenna subassembly from the P6 Truss to the P1 truss, installed a new transponder on P1, and retrieved the P6 transponder. The spacewalk ended early when Mastracchio’s spacesuit was damaged. The suit had a ...

... M. Tani undertook the second EVA of STS-120 , disconnecting cables from the P6 Truss , to remove the P6 Truss from the Z1 truss. Tani and Parazynski made progress outfitting the new ...

... Perrin attached a power and data grapple fixture onto the P6 truss, setting the stage for the future relocation of the P6, and removed thermal blankets to prepare MBS for installation. Whitson ...

... and science modules, including those of international partners. EVA 4, 6 hours, 38 minutes; the P6 solar array wing had been extended in space for six years. The array panels would ... the partially retracted solar array so it would fully fold. Curbeam and Fuglesang guided the P6 solar array wing inside its blanket box. Subsequently, the Solar Alpha Rotary Joint was powered ...

... , 59 minutes; Wolf and Cassidy replaced two of six old solar array batteries on the P6 truss. These batteries were the oldest ones on the space station and were located at ... hours, 12 minutes; Cassidy and Marshburn replaced the remaining four solar array batteries on the P6 truss. EVA 5, 4 hours, 54 minutes; Cassidy and Marshburn installed video cameras on the ...

Powered by Sphinx